Branch Reinforcement Sizer

$0.00

Determines the minimum required reinforcement area for branch connections based on header and branch sizes and code rules from section 304.3.3: Reinforcement of Welded Branch Connections in ASME B31.3

Input Required

  1. Material of Construction of Header Pipe and Branch Pipe.

  2. Nominal Pipe Size of Header and Branch.

  3. Standard Pipe Thickness e.g. STD, S40 etc. of Header and Branch.

  4. Corrosion allowance for header and branch pipe.

  5. Negative mill tolerance for Header and Branch Pipe.

  6. Type of Pipe Construction : Seamless, ERW or FBW for both Header and Branch.

  7. Design Pressure.

  8. Design Temperature.

  9. Branch Angle. Maximum angle is 90 Degree. Provide smaller angle.

Determines the minimum required reinforcement area for branch connections based on header and branch sizes and code rules from section 304.3.3: Reinforcement of Welded Branch Connections in ASME B31.3

Input Required

  1. Material of Construction of Header Pipe and Branch Pipe.

  2. Nominal Pipe Size of Header and Branch.

  3. Standard Pipe Thickness e.g. STD, S40 etc. of Header and Branch.

  4. Corrosion allowance for header and branch pipe.

  5. Negative mill tolerance for Header and Branch Pipe.

  6. Type of Pipe Construction : Seamless, ERW or FBW for both Header and Branch.

  7. Design Pressure.

  8. Design Temperature.

  9. Branch Angle. Maximum angle is 90 Degree. Provide smaller angle.